EASYGrout

Overview

A high-quality slurry grout for use on porcelain

Designed specifically for ceramic and porcelain tiles for a fine, textured finish
A cementitious grout which is applied as a slurry unlike traditional floor tile grouts
Easy to use. Simply mix, pour, sweep, and rinse
Each tub contains 3 x 5kg bags for minimal waste. Coverage: up to 20m² (215ft²) per tub
EASYGrout is available in a range of colors and is suitable for joints from 5mm to 25mm wide with a minimum depth of 10mm.

EASYGrout mixes readily with water to give a highly flowable joint filling, and grouting mortar ideal for use on interior and exterior tiled floor surfaces where a high early strength, resilient, compact grout joint is needed, particularly in areas subject to early and sustained trafficking.

It is not suitable for use on vertical surfaces. It is designed specifically for ceramic and porcelain tiles and is not recommended for use on natural stone. Natural stone and porous materials are particularly at risk from permanent discoloration.

Argent

Blanco

Crema

Grafito

Videos

How to use EASYGrout

Installation Guide

Step 1. Prepare

Tiles and joints should be clean and free from debris. Ensure tiles are dampened prior to grouting. Avoid standing water on the paving and in the joints.

Step 2. Mix

Add powder to clean, cold water. Using a powered paddle, slowly mix for 3-5 minutes to form a smooth, lump-free slurry.

Top Tip! Add an additional 100ml of water if grout is not flowable.

Step 3. Apply

Either pour the slurry grout over a small area and spread into the joints using a rubber squeegee or pour along the grout-lines to minimise spread and clean-up.

Top Tip! Apply when tiles are cool to touch.

Step 4. Clean

Remove as much grout residue as possible using the squeegee. Then, use a tilers sponge and bucket with a residue trap to remove any remaining grout residue remembering to change the cleaning water regularly. Be careful to avoid pulling out any grout.

Step 5. Finish

Once the grout has hardened, clean the tile surface thoroughly and any remaining grout or haze can be removed using Azpects Grout Residue Cleaner.